WNS Series Gas Fired Firetube Boiler

Product thermal capacity: 1-20 t/h
Working pressure: 0.7-2 MPa
Available fuel: Natural gas, coke oven gas, biogas, diesel, heavy oil, light oil, crude oil, etc.
Available industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.

Introduction of WNS Series Gas Fired Firetube Boiler

The WNS series gas fire tube boiler is a horizontal, shell-type, wet-back, three-pass smoke tube boiler. Gas is introduced into the boiler burner through pipelines and mixed with air to form a combustible gas mixture. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere. The tail of the flue is equipped with an economizer and a condenser, which can achieve low emissions of harmful gases and high energy utilization.

Features of WNS Series Gas Fired Firetube Boiler

High Efficiency: The WNS series boiler adopts a wet-back structure and a three-pass or two-pass fire tube design. It is equipped with advanced burners, an economizer, and a condenser at the tail of the flue, achieving a thermal efficiency of over 98%. Additionally, the threaded smoke tubes enhance the heat transfer coefficient of the boiler.

Environmental Friendliness and Energy Saving: The low-nitrogen combustion technology effectively suppresses the emission of NOx, reducing environmental pollution.

Safety and Reliability: The WNS series boiler is equipped with multiple protection systems, including high and low water level alarms, extremely low water level protection, overpressure protection, and flameout protection. These functions ensure the safe and reliable operation of the boiler.

Easy Operation: The design of this series of products is rational, installation is convenient, and the level of automation in operation is high, making it simple to operate.

Specification of WNS Series Best Natural Gas Boilers

Model Rated steam capacity (t/h) Rated working pressure (MPa) Rated steam temperature (℃) Feed water temperature (℃) Maximum transport weight (t) Maximum transport dimension (m)
WNS1-0.7-Q(Y) 1 0.7 170 20 4.5 3.25×1.80×2.00
WNS1-1.0-Q(Y) 1 1.0 184 20 4.5 3.25×1.80×2.00
WNS1.5-1.0-Q(Y) 1.5 1.0 184 20 7.0 3.65×2.05×2.45
WNS1.5-1.25-Q(Y) 1.5 1.25 194 20 7.0 3.65×2.05×2.45
WNS2-1.0-Q(Y) 2 1.0 184 20 9.0 4.60×2.20×2.60
WNS2-1.25-Q(Y) 2 1.25 194 20 9.0 4.60×2.20×2.60
WNS3-1.0-Q(Y) 3 1.0 184 20 11.5 5.35×2.40×2.80
WNS3-1.25-Q(Y) 3 1.25 194 20 11.5 5.35×2.40×2.80
WNS4-1.25-Q(Y) 4 1.25 194 20 15.0 5.00×2.60×2.95
WNS4-1.6-Q(Y) 4 1.6 204 20 15.0 5.00×2.60×2.95
WNS5-1.25-Q(Y) 5 1.25 194 20 18.0 5.55×2.658×3.20
WNS5-1.6-Q(Y) 5 1.6 204 20 18.0 5.55×2.658×3.20
WNS6-1.25-Q(Y) 6 1.25 194 20 19.5 5.93×2.80×3.20
WNS6-1.6-Q(Y) 6 1.6 204 20 19.5 5.93×2.80×3.20
WNS8-1.25-Q(Y) 8 1.25 194 20 25.0 7.00×2.80×3.25
WNS8-1.6-Q(Y) 8 1.6 204 20 25.0 7.00×2.80×3.25
WNS10-1.25-Q(Y) 10 1.25 194 104 27.5 7.65×2.80×3.25
WNS10-1.6-Q(Y) 10 1.6 204 104 27.5 7.65×2.80×3.25
WNS15-1.25-Q(Y) 15 1.25 194 104 40.0 7.95×3.50×3.75
WNS15-1.6-Q(Y) 15 1.6 204 104 40.0 7.95×3.50×3.75
WNS20-1.25-Q(Y) 20 1.25 194 104 52.0 8.55×3.90×4.15
WNS20-1.6-Q(Y) 20 1.6 204 104 52.0 8.55×3.90×4.15