Under the strong demand of production and life, the number of heating boilers is increasing, and therefore the fuel consumption is also increasing. The current market strongly advocates energy conservation, so it is especially important to improve the industrial steam boiler efficiency. Only by improving the thermal efficiency of gas steam boilers can fuel consumption be reduced and fuel be saved, which is also in line with the concept of energy conservation and emission reduction.
First of all, we know that gas steam boilers are mainly used in industrial production. In the chemical, food, building materials, textile, printing and dyeing, garment and other industries, steam is needed as a heat source, that is, steam boilers are needed. The operation of gas steam boilers consumes energy. If the thermal efficiency of the boiler is increased by one percentage point, the gas consumption of a 2 ton gas steam boiler is 148 cubic meters per hour, which saves 1.48 cubic meters per hour. If it is a 4 ton or 6 ton gas boiler, the savings will be even greater. In the future use of boilers, how to improve the thermal energy utilization energy as the key point of breakthrough.
Our gas steam boiler heat efficiency can reach 98%. Many people do not believe how to achieve such high thermal efficiency. The main reason is that the boiler structure is well designed and the most advanced technology of heat absorption and insulation is used. The industrial steam boiler efficiency can be improved. Only a small part of the heat generated by the combustion of natural gas flows into the outside air, and most of it is absorbed and used by the gas steam boiler. Secondly, we will teach users how to use the boiler. If the method is proper, the heat utilization rate will also be improved on the basis of the product.
This series of industrial steam boiler is exemplified by the 10 ton gas fired steam boiler. The boiler should not be overloaded during use. Usually not more than 9 tons is enough. This is to control the boiler load instead of wasting fuel. When the burner is started, the inlet air volume should be adjusted. The inlet air volume should not be too large or too small, so that the ratio of fuel to air is controlled within a reasonable range, so that the natural gas is fully combusted and the flue gas temperature of the gas steam boiler is effectively reduced. The heat loss taken by the air will also be smaller, to a certain extent, to improve the utilization of heat energy.
Finally, the boiler feed water must be purified, the use of clean soft water can improve the quality of water vapor. The most important thing to prevent the occurrence of scale is to reduce the amount of sewage. Reducing the amount of effluent equals reducing heat loss. This is because each discharge will take away a large amount of heat, resulting in a reduction in the thermal efficiency of the gas steam boiler. Industrial steam boilers are highly efficient, stable and reliable in operation, and are trusted by users. Welcome to ZOZEN Boiler for consultation.
