The gas production per hour of a 4 ton oil fired boiler is how many tons of steam the boiler produces per hour. So how to determine the hourly gas production of a 4 ton oil boiler in actual operation? In this article, ZOZEN Boiler will answer your questions.
When an oil fired steam boiler is rated for steam parameters, rated feedwater temperature, use of design fuel and guaranteed thermal efficiency, the gas production per hour of a 4 ton oil fired boiler is the boiler tonnage. For example, in the rated state, the gas production per hour of a 4 ton boiler oil boiler is 4 tons.
Generally, boilers are equipped with boiler steam flow meters, which can directly display the actual amount of steam from the boiler. If not equipped with a steam flow meter, there are still several 4 ton boiler oil boiler hourly gas production formula can be roughly calculated from the amount of steam as follows.
- According to the amount of fuel, the amount of converted steam.
- Feedwater flow meter statistics.
- Based on the pressure during stable operation, according to the pressure control switch control of the burner nozzle, check the nozzle hourly oil injection volume, can also be roughly derived, and then converted to steam volume.
- Based on the pressure after the pump of the feed pump, check the flow head chart of such a pump, the hourly flow data, can be roughly calculated.
- In a smooth cross-sectional section to measure the exhaust flow rate and temperature, resulting in the flow of smoke and steam, converted to steam volume. This method of calculation is more complex and generally not commonly used.
This method of 4 tons of boiler oil boiler hourly gas production formula is: boiler steam volume = heat of fuel / (heat of evaporation per ton of steam + heat required to raise each ton of water from room temperature to 100 degrees) * the thermal efficiency of the boiler
The hourly gas production of the 4-ton boiler oil boiler in this method can be considered: boiler steam volume = water feed
The method in the 4 ton boiler oil boiler hourly gas production formula and method one is basically the same.
The method of 4 tons of boiler oil boiler hourly gas production: boiler steam = pump flow = open root number under the (pump theoretical head – actual head) / pump internal friction
The above is the calculation method of gas production per hour of 4 ton of oil boiler in different ways, hope it will be helpful to you.
Wuxi ZOZEN Boiler Co., Ltd. has more than thirty years of experience in manufacturing industrial boilers. In the manufacturing of oil boilers, ZOZEN Boiler adopts a number of innovative technologies with remarkable structural performance advantages, not only high thermal efficiency, but also compact structure, convenient transportation, low infrastructure investment, and various technical indicators have reached the advanced level at home and abroad. At the same time, ZOZEN Boiler also established four full service system, including the whole process of installation guidance, 72 hours to accompany the operation and other services, to effectively solve the problems of users.
