The oil-fired thermal oil boilers in Ukraine uses coal, heavy oil, light oil or combustible liquid as fuel and thermal oil as heat carrier. A circulating oil pump is used to force the liquid phase to circulate the heat energy to the heat equipment, and then the heat energy is returned to the reheated special type industrial furnace. This series of thermal oil boiler is widely used in petrochemical, textile, printing and dyeing, plastic, rubber, food processing, wood processing, asphalt heating, carton production, vegetable dehydration, paint baking, casting sand mold drying and so on.
The YQW oil fired horizontal thermal fluid heater can obtain higher operating temperature under lower operating pressure. Stable heating and precise temperature can be obtained. Thermal efficiency is maintained at a good level at all levels of load. The liquid phase transports the heat energy, at 300℃, the heat carrier is 70 times less than the saturated steam pressure of the water. It has complete operation control and safety monitoring device.
This series of thermal oil boilers has the characteristics of low pressure, high temperature, safety, high efficiency and energy saving. With complete operation control and safety monitoring device, the working temperature can be precisely controlled. Reasonable structure, complete supporting facilities, short installation cycle, easy operation and maintenance, easy to boiler layout.
The coking thickness of this series of industrial boilers is safe under 2mm in production practice, and the coking layer in the furnace tube is between 0~1.5mm. At this time, the continuous storage of the coking layer is roughly balanced with the amount of melting washed by the heat carrier. The thickness of the coke layer in the furnace tube can be determined by an ultrasonic thickness meter. A filter should be installed in the circulation pump population to filter out the chemical changes resulting in the suspension of the polymer and the local overheating of carbon particles. The filter should be easy to disassemble and replace, so as to clean up the residue and impurities regularly to ensure the filtering effect.
The flame retardant spoiler is inserted in the fire tube of the oil-fired thermal oil boilers manufactured by our factory, which can slow down the smoke exhaust speed, strengthen heat exchange, lower the temperature of the smoke discharged from the smoke chamber, reduce heat loss and save fuel. The furnace body is designed by computer aided, and the heating surface is optimized. The layout is compact and reasonable. The industrial boiler occupies a small area and has high thermal efficiency. The thermal oil boiler is designed according to the atmospheric furnace, the top of the furnace body is provided with an air outlet, the boiler is in the state of no pressure, reduce the risk of explosion.
